Article: DSPIAE Sprue Rack Review: The Ultimate Runner Organizer for Gunpla Builders

DSPIAE Sprue Rack Review: The Ultimate Runner Organizer for Gunpla Builders
If you build plastic model kits (Gundam, scale models, miniatures), you know the struggle: dozens of sprues (runners) lying around, parts getting lost or mixed, cluttered workbench, frustration. The DSPIAE Sprue Rack solves exactly this problem — helping you keep sprues neat, labeled, and easy to access.
Below is everything you need to know — how it works, why it’s worth it, tips for use — and where to find one.
What Is the DSPIAE Sprue Rack?
The DSPIAE Sprue Rack (also called DSPIAE PT-SR Runner/Sprue Panel Organizer) is a modular rack system made of ABS plastic.
Key features:
- Comes with 5 rack modules in one set.
- Includes 28 letter tabs (A–Z) and 20 number tabs to label each sprue.
- Each module has anti-slip strips underneath to increase stability, avoiding slipping or sliding.
- Modular/interlocking design: you can combine modules side by side and rearrange freely.
- Ample spacing between slots reduces interference between sprues.
- Compact size per module for easy storage when not in use.
Why Use a Sprue Rack?
Here’s why modelers love this kind of organizer, especially the DSPIAE version:
1. Organization & clarity
With labels (letters & numbers), you can map sprues to your instruction manual. No more guessing “which sprue was that piece on?”
2. Cleaner workspace
Sprues stand upright — they don’t pile up or scatter. Your bench stays tidy.
3. Prevent damage or loss
Parts can detach from runners; if the runner is lying around, you might lose tiny bits. The rack holds sprues steady.
4. Easy access
Because sprues are vertical and clearly labeled, you can pick out what you need fast.
5. Modular & expandable
If one rack is not enough, add more modules and link them.
6. Affordable / small investment
Compared to the time lost hunting parts, the rack pays off quickly.
How to Use the DSPIAE Sprue Rack: Tips & Best Practices
Here are tips to get the most from your sprue rack:
- Label early
As soon as you cut a sprue, slip it into the rack and label it (e.g. “B3”). Don’t wait until later.
- Group by section or model
If you’re building multiple kits or a big multi-part model, use each module for a model or section.
- Leave space
Don’t jam the slots — some runners are weird shapes, so leave a little wiggle room so parts aren’t bending or stressing.
- Use the anti-slip strips
Place the rack on a clean flat surface; the rubber strips help keep each module from shifting.
- Rearrange when needed
Because they interlock, you can reconfigure modules mid-build as your parts count grows.
- Store spare labels
The set comes with more letters/numbers than needed. Keep extras in a small box so you don’t lose them.
- Don’t force parts
When removing a sprue, gently lift it. Forcing can crack tabs or damage parts.
Where to Get the DSPIAE Sprue Rack?
You can find the DSPIAE PT-SR Runner/Sprue Panel Organizer at P-Rex Hobby - your trusted destination for Gunpla and model kits.
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.