{"title":"GodHand Pin Vises","description":"\u003cp\u003e\u003cstrong\u003ePin vises\u003c\/strong\u003e are GodHand's hand-drilling and engraving handles — plus the bits that go in them. The range covers the Power Pin Vise, the Quick Power and Micro versions and the short Power Pin Vise with a deep socket, so you can pick the grip and chuck that suit your hand and the work.\u003c\/p\u003e\n\u003cp\u003eThe accessories are the interesting part: Bit Blade chisel sets in flat, round and V-shaped edges; Spin Blades with chisel tips from 0.5 mm to 2.9 mm; Spin Molds that cut clean circular holes; and the hex-shank quick-attachable drill bit sets, covering 0.5 mm up to 2.9 mm across sets A to D.\u003c\/p\u003e\n\u003cp\u003eMany detail tools pair with the \u003ca href=\"\/collections\/godhand-files\"\u003eFiles\u003c\/a\u003e line — the Line Engraving File grips are pin-vise handles. Browse all \u003ca href=\"\/collections\/godhand\"\u003eGodHand\u003c\/a\u003e tools.\u003c\/p\u003e","products":[{"product_id":"godhand-drill-bit-set-of-5-pieces-b","title":"GodHand Drill Bit Set of 5 Pieces (B)","description":"\u003cp\u003e\u003cstrong\u003eGodHand Drill Bit Set B (GH-DB-5B)\u003c\/strong\u003e — a set of drill bits designed for plastic models, with the point ground so it cuts steadily instead of grabbing.\u003c\/p\u003e\u003cp\u003eMost drill bits are general purpose; these were designed for models. GodHand ground the point to an obtuse angle, and the point has a cutting edge of its own, so the bit bites with light pressure and the hole stays round rather than coming out oval. Because it cuts shallow it is unlikely to punch straight through a plastic sheet. Each bit is also made to a length that is easy to control, and shorter at the tip than a standard bit, so the distance from your hand to the cutting point is closer and it is easier to aim without wobble. The shanks run 2.5–3 mm, so you do not need to change collets between bits. They pair with the Spin Blade range.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFive bits — 1.0, 1.5, 2.0, 2.5 and 3.0 mm\u003c\/li\u003e\n  \u003cli\u003eShank 3.0 mm\u003c\/li\u003e\n  \u003cli\u003eObtuse point with its own cutting edge — bites with light pressure\u003c\/li\u003e\n  \u003cli\u003eCuts steadily and keeps the hole round\u003c\/li\u003e\n  \u003cli\u003eCuts shallow, so it is unlikely to blow through a plastic sheet\u003c\/li\u003e\n  \u003cli\u003eShorter tip than a standard bit — closer focus, easier to aim, less wobble\u003c\/li\u003e\n  \u003cli\u003e2.5–3 mm shanks across the range, so no collet changes\u003c\/li\u003e\n  \u003cli\u003ePairs with the Spin Blade range\u003c\/li\u003e\n  \u003cli\u003eBit material: special tool steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDrill bit set (GH-DB-5B) x 1 set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42299841478836,"sku":"GHAND-DB-5B","price":36.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/products\/1_c54394ad-9e42-43c1-85f7-b27aff9d7a5c.jpg?v=1686709858"},{"product_id":"godhand-drill-bit-set-of-8-pieces-c","title":"GodHand Drill Bit Set of 8 Pieces (C)","description":"\u003cp\u003e\u003cstrong\u003eGodHand Drill Bit Set C (GH-DB-8C)\u003c\/strong\u003e — a set of drill bits designed for plastic models, with the point ground so it cuts steadily instead of grabbing.\u003c\/p\u003e\u003cp\u003eMost drill bits are general purpose; these were designed for models. GodHand ground the point to an obtuse angle, and the point has a cutting edge of its own, so the bit bites with light pressure and the hole stays round rather than coming out oval. Because it cuts shallow it is unlikely to punch straight through a plastic sheet. Each bit is also made to a length that is easy to control, and shorter at the tip than a standard bit, so the distance from your hand to the cutting point is closer and it is easier to aim without wobble. The shanks run 2.5–3 mm, so you do not need to change collets between bits. They pair with the Spin Blade range.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEight bits — 1.1, 1.2, 1.3, 1.4, 1.6, 1.7, 1.8 and 1.9 mm\u003c\/li\u003e\n  \u003cli\u003eShank 3.0 mm\u003c\/li\u003e\n  \u003cli\u003eObtuse point with its own cutting edge — bites with light pressure\u003c\/li\u003e\n  \u003cli\u003eCuts steadily and keeps the hole round\u003c\/li\u003e\n  \u003cli\u003eCuts shallow, so it is unlikely to blow through a plastic sheet\u003c\/li\u003e\n  \u003cli\u003eShorter tip than a standard bit — closer focus, easier to aim, less wobble\u003c\/li\u003e\n  \u003cli\u003e2.5–3 mm shanks across the range, so no collet changes\u003c\/li\u003e\n  \u003cli\u003ePairs with the Spin Blade range\u003c\/li\u003e\n  \u003cli\u003eBit material: special tool steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDrill bit set (GH-DB-8C) x 1 set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42299841544372,"sku":"GHAND-DB-8C","price":49.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/products\/1_4e292502-4622-4c23-8f8b-ebeb12ffd33e.jpg?v=1686709860"},{"product_id":"godhand-power-pin-vise","title":"GodHand Power Pin Vise","description":"\u003cp\u003eGodHand Power Pin Vise (GH-PB-98ST) — an iron-capped pin vise that holds a drill bit firmly and takes Ø0.1 to Ø3.2 mm.\u003c\/p\u003e\u003cp\u003eThe cap and the collets are iron, and that is the point: a hard metal chuck grips without the slipping and spinning that a soft one develops with use, whether the bit is thin or thick. Two collets are supplied, which between them cover Ø0.1 mm to Ø3.2 mm. The rubber grip is GodHand’s own in blue, shaped so it is easy on the fingers and comfortable over a long session. It suits fine drilling and deburring work.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIron cap and collets — grip firmly and resist wearing to a slip\u003c\/li\u003e\n  \u003cli\u003eTwo collets cover Ø0.1 mm to Ø3.2 mm\u003c\/li\u003e\n  \u003cli\u003eGodHand original blue rubber grip — comfortable over long sessions\u003c\/li\u003e\n  \u003cli\u003eSuited to fine drilling and deburring\u003c\/li\u003e\n  \u003cli\u003eOverall length approx. 100 mm\u003c\/li\u003e\n  \u003cli\u003eMaterials: iron (tip cap, collets), brass (body)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePower Pin Vise x 1\u003c\/li\u003e\n  \u003cli\u003eCollet x 2\u003c\/li\u003e\n  \u003cli\u003eTip cap x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42299845738676,"sku":"GHAND-PB-98ST","price":76.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/products\/1_661a8e16-27c4-4b04-af0e-f27f05b0f70e.jpg?v=1686709946"},{"product_id":"godhand-short-power-pin-vise-with-deep-socket-type","title":"GodHand Short Power Pin Vise with Deep Socket Type","description":"\u003cp\u003eThe GodHand Short Pin Vise - the ultimate tool for precision and control! Designed by the experts at GodHand — this pin vise boasts exceptional gripping power, making it a must-have for hobbyists and professionals alike. Its compact size, at just 80mm in length, is about 2\/3 the size of a standard pin vise, allowing for pinpoint accuracy in targeting your work area. The ergonomic rubber grip ensures a comfortable hold while preventing slippage, even when applying pressure. This pin vise is compatible with GodHand's bit series (shaft diameter 2.5mm, 3.0mm) as well as other bits ranging from 2.5mm to 3.2mm in diameter. Additionally, the bit (blade) can be inserted deeply, bringing your fingertips closer to the cutting edge for control compared to traditional pin vises.\u003c\/p\u003e\n\n\u003cp\u003e[Product Specifications]\n\u003cbr\u003e[Includes]:\n\u003cbr\u003e- Compatible shaft diameter: 2.5 - 3.2mm in diameter\n\u003cbr\u003e- End cap, deep collet material: Iron (hardened)\n\u003cbr\u003e- Body, rear end cap, rotating washer material: Brass\n\u003cbr\u003e- Rubber grip material: TPE\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42299846230196,"sku":"GHAND-PBS-KC","price":64.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-pbs-kc_0.png?v=1756202577"},{"product_id":"godhand-godhand-bit-blade-set-flat-blade-set-of-5","title":"GodHand - Bit Blade set [Flat Blade] (Set of 5)","description":"\u003cp\u003eGodHand Bit Blade Set — Flat Blade (GH-BBH-1-3) — five flat-blade chisels on 3 mm shanks that fit a pin vise, for carving and scraping detail into a part.\u003c\/p\u003e\u003cp\u003eThe whole shank is cylindrical but the cutting end is a flat plane, and either face of the blade can be used as the flat. Which face you turn up changes the angle that cuts most comfortably, so it is worth trying both. Because all five blades share a 3 mm shank you swap blades without touching the pin vise collet. GodHand notes these are a one-sided blade unlike the Spin Blade — one face is angled and the other vertical — so unlike a Spin Blade they are not meant to be rotated, but the thicker angled side makes them sturdier. Pressed through plastic sheet they leave a cut like a single-bevel knife rather than a double-bevel one.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFive flat blades — 1.0, 1.5, 2.0, 2.5 and 3.0 mm\u003c\/li\u003e\n  \u003cli\u003e3 mm shank across the set — no collet swap needed between blades\u003c\/li\u003e\n  \u003cli\u003eCuts rubber eraser, wood, plastic, putty and resin — and seal-carving stone\u003c\/li\u003e\n  \u003cli\u003eOne face angled, one vertical, so it is not made for spinning\u003c\/li\u003e\n  \u003cli\u003eThicker angled side makes it sturdier than the equivalent Spin Blade\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eBlade material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBit Blade flat blade 1.0 mm x 1\u003c\/li\u003e\n  \u003cli\u003eBit Blade flat blade 1.5 mm x 1\u003c\/li\u003e\n  \u003cli\u003eBit Blade flat blade 2.0 mm x 1\u003c\/li\u003e\n  \u003cli\u003eBit Blade flat blade 2.5 mm x 1\u003c\/li\u003e\n  \u003cli\u003eBit Blade flat blade 3.0 mm x 1\u003c\/li\u003e\n  \u003cli\u003eCase x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480191537332,"sku":"GH-BBH-1-3","price":48.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/7457554366644_hires_4983c775-98ee-44ae-b493-4b99d8a89421.jpg?v=1791836302"},{"product_id":"godhand-godhand-bit-blade-set-round-blankblade-set-of-5","title":"GodHand - Bit Blade set [Round BlankBlade] (Set of 5)","description":"\u003cp\u003eGodHand Bit Blade Set — Round Blank Blade (GH-BBM-1-3) — five round-blade chisels on 3 mm shanks that fit a pin vise, for carving hollows and grooves.\u003c\/p\u003e\u003cp\u003eThe cutting end is an oval cylinder, which is what makes it a round (gouge) blade. It is handy for cutting hollows and channels, and because it is small and easy to steer it covers a wide range of jobs — scribing grooves, fine carving and cutting your own stamps. The sharp edge also lets it shave away surface detail on things like ship models, and unlike a knife the blade does not dig into the deck surface, so the work is easier. Drawn like a plane, it makes a round hollow with little effort. All five share a 3 mm shank so you swap blades without touching the collet.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFive round blades — 1.0, 1.5, 2.0, 2.5 and 3.0 mm\u003c\/li\u003e\n  \u003cli\u003eOval-cylinder cutting end for hollows and grooves\u003c\/li\u003e\n  \u003cli\u003eSmall and easy to handle — good for grooves, fine carving and stamp making\u003c\/li\u003e\n  \u003cli\u003eSharp enough to shave surface detail off ship models without digging in\u003c\/li\u003e\n  \u003cli\u003eDrawn like a plane it cuts a round hollow easily\u003c\/li\u003e\n  \u003cli\u003e3 mm shank across the set — no collet swap needed\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eBlade material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBit Blade round blade 1.0 mm x 1\u003c\/li\u003e\n  \u003cli\u003eBit Blade round blade 1.5 mm x 1\u003c\/li\u003e\n  \u003cli\u003eBit Blade round blade 2.0 mm x 1\u003c\/li\u003e\n  \u003cli\u003eBit Blade round blade 2.5 mm x 1\u003c\/li\u003e\n  \u003cli\u003eBit Blade round blade 3.0 mm x 1\u003c\/li\u003e\n  \u003cli\u003eCase x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480191570100,"sku":"GH-BBM-1-3","price":48.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/7457554399412_hires_21dd807d-b6ca-4910-a2cb-3bed806dd347.jpg?v=1791836303"},{"product_id":"godhand-spin-mold-and-short-power-pin-vise-set","title":"Spin Mold and Short Power Pin Vise Set","description":"\u003cp\u003e\u003cstrong\u003eGodHand Spin Mold \u0026amp; Short Power Pin Vise Set (GH-CSB-PBS-SET)\u003c\/strong\u003e — a bundle of the five-piece Spin Mold set and the Short Power Pin Vise with GodHand's deep collet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpin Mold five-piece set (GH-CSB-1-3).\u003c\/strong\u003e These are flat drill bits with a centre guide: unlike a normal drill, which leaves a cone at the bottom, they cut a round hole with a flat floor, and the centre guide means you do not need a pilot hole. Press the guide where you want the hole and turn clockwise with light pressure. The set is 1.0, 1.5, 2.0, 2.5 and 3.0 mm, all on 3 mm shanks, supplied in a case. One thing to know: unlike Spin Blades, Spin Molds cannot be used as chisels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShort Power Pin Vise, deep collet type (GH-PBS-DC).\u003c\/strong\u003e About 80 mm long — two-thirds the length of GodHand's standard Power Pin Vise — so it is easier to bring to the exact spot. The iron cap and hardened iron collet grip the shank firmly and strongly suppress spinning; the body and rear cap are brass and the rubber grip is TPE, which is comfortable and does not slip. Because the built-in collet is GodHand's deep type, the bit goes further in, shortening the distance from your fingers to the tip and making the cutter easier to control than with a conventional pin vise. It fits shanks Φ2.5–3.2 mm, matching GodHand's drill bit range.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin Mold five-piece set — 1.0, 1.5, 2.0, 2.5 and 3.0 mm\u003c\/li\u003e\n  \u003cli\u003eCentre guide cuts a flat-bottomed round hole with no pilot hole\u003c\/li\u003e\n  \u003cli\u003e3 mm shanks across the set; case included; special cutlery steel\u003c\/li\u003e\n  \u003cli\u003eSpin Molds cannot be used as chisels (unlike Spin Blades)\u003c\/li\u003e\n  \u003cli\u003eShort Power Pin Vise: approx. 80 mm, two-thirds the standard length\u003c\/li\u003e\n  \u003cli\u003eIron cap and hardened iron collet resist spinning; brass body and rear cap; TPE rubber grip\u003c\/li\u003e\n  \u003cli\u003eDeep collet takes the bit further in, bringing the tip closer to your fingers\u003c\/li\u003e\n  \u003cli\u003ePin vise fits Φ2.5–3.2 mm shanks — matches GodHand's drill bit range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin Mold 1.0 mm x 1\u003c\/li\u003e\n  \u003cli\u003eSpin Mold 1.5 mm x 1\u003c\/li\u003e\n  \u003cli\u003eSpin Mold 2.0 mm x 1\u003c\/li\u003e\n  \u003cli\u003eSpin Mold 2.5 mm x 1\u003c\/li\u003e\n  \u003cli\u003eSpin Mold 3.0 mm x 1\u003c\/li\u003e\n  \u003cli\u003eSpin Mold case x 1\u003c\/li\u003e\n  \u003cli\u003eShort Power Pin Vise, deep collet type (GH-PBS-DC) x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480192192692,"sku":"GH-CSB-PBS-SET","price":112.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/1_cb4323cb-8c5a-4f5b-9a73-58dcec490082.jpg?v=1701216902"},{"product_id":"godhand-godhand-spin-mold-45","title":"GodHand - Spin Mold 45","description":"\u003cp\u003eSpin Mold set for making round flat bottom holes with a diagonal 45° wall. With center pin, you can drill a hole without pilot hole. Dia of blade (size of bottom hole diameter :1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm Dia of body: 3.0mm, round shank\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480192258228,"sku":"GH-CSB45-1-3","price":88.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-cbs45-1-3_0.jpg?v=1756192254"},{"product_id":"godhand-godhand-drill-bit-for-set-of-5-a","title":"GodHand - Drill Bit for set of 5 (A)","description":"\u003cp\u003eGodHand Drill Bit Set A (GH-DB-5A) — five drill bits from 0.5 to 0.9 mm, shaped for drilling plastic models.\u003c\/p\u003e\u003cp\u003eMost drill bits are general-purpose; these were designed for models. The point is ground to an obtuse angle, which cuts more steadily than a sharp general-purpose point — the hole stays round instead of coming out oval, and because it cuts shallow it is unlikely to punch straight through a plastic sheet. Each bit is also made to a length that is easy to control, and shorter at the tip than a standard bit, so the distance from your hand to the cutting point is closer and it is easier to aim without wobble. The shanks run 2.5–3 mm, so you do not need to change collets between bits. They pair with the Spin Blade range.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFive bits — 0.5, 0.6, 0.7, 0.8 and 0.9 mm\u003c\/li\u003e\n  \u003cli\u003eObtuse point cuts steadily and keeps the hole round\u003c\/li\u003e\n  \u003cli\u003eCuts shallow, so it is unlikely to blow through a plastic sheet\u003c\/li\u003e\n  \u003cli\u003eShorter tip than a standard bit — closer focus, easier to aim, less wobble\u003c\/li\u003e\n  \u003cli\u003eShank 2.5 mm, consistent across the set so no collet changes\u003c\/li\u003e\n  \u003cli\u003ePairs with the Spin Blade range\u003c\/li\u003e\n  \u003cli\u003eBit material: special tool steel; case: PP; made in China\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDrill bit 0.5 mm x 1\u003c\/li\u003e\n  \u003cli\u003e0.6 mm x 1\u003c\/li\u003e\n  \u003cli\u003e0.7 mm x 1\u003c\/li\u003e\n  \u003cli\u003e0.8 mm x 1\u003c\/li\u003e\n  \u003cli\u003e0.9 mm x 1\u003c\/li\u003e\n  \u003cli\u003eCase x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480192389300,"sku":"GH-DB-5A","price":25.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/7457555185844_hires_be0ca865-1f02-43bc-93a5-fd6829a4831c.jpg?v=1791836312"},{"product_id":"godhand-godhand-drill-bit-for-set-of-5-b","title":"GodHand - Drill Bit for set of 5 (B)","description":"\u003cp\u003eDrill Bit Set[drill blade]size: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm Dia.: 3.0mm GodHand expands their superior tool-building knowledge into the world of drills with this set of 5 drill bits! As a shortened length compared to other drill bits, these have been specifically designed for model-building. They're designed for use with a pin vise that can grip items with an axis of 2.5 to 3.2mm.\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480192422068,"sku":"GH-DB-5B","price":26.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/7457555218612_hires_f5fc608a-6210-4007-83fd-1a0d86099e74.jpg?v=1791836314"},{"product_id":"godhand-godhand-drill-bit-for-set-of-8-c","title":"GodHand - Drill Bit for set of 8 (C)","description":"\u003cp\u003eGodHand expands their superior tool-building knowledge into the world of drills with this set of 8 drill bits! With a shortened overall length compared to other drill bits, these have been specifically designed with model-building in mind. They're designed for use with a pin vise that can grip items with an axis of 2.5 to 3.2mm. [Included Drill Bit Sizes]:1.1 mm1.2 mm 1.3 mm1.4 mm1.6 mm1.7 mm1.8 mm1. 9mm\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480192454836,"sku":"GH-DB-8C","price":36.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/7457555251380_hires_e3e1231d-0f92-409c-add1-5be7a8546368.jpg?v=1791836315"},{"product_id":"godhand-godhand-drill-blade-chisel-bit-set","title":"GodHand - Drill Blade (Chisel Bit Set)","description":"\u003cp\u003eThis set of impressive drill blades from GodHand boasts the ability to create smooth holes where even where other drill blades leave rough surfaces! Intended for use with pin vices. Includes one each of the following size blades: 1.0mm1.5mm2.0mm2.5mm All blades feature a 3.0mm thick base.\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480192585908,"sku":"GH-DBB-1-25","price":76.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-dbb-1-2-5_0.jpg?v=1756198456"},{"product_id":"godhand-godhand-quick-attachable-drill-bit-set-d","title":"GodHand - Quick Attachable Drill Bit Set D","description":"\u003cp\u003eGodHand Quick Drill Bit Set D (GH-DBQ-8D) — eight hex-shank drill bits sized 2.1 to 2.9 mm, designed for model work.\u003c\/p\u003e\u003cp\u003eThe shank is a 4 mm hex, so the bit seats without slipping and you can drill without worrying about it spinning in the chuck. The point is sharpened so it cuts gradually, which keeps it from wandering and keeps the hole round, and it leaves a clean rim where it breaks through. Because the geometry bites, it needs only light pressure. Push the bit straight into GodHand’s magnet-equipped Quick Power Pin Vise and it is seated — no chucking, which speeds up a job where you change bits often.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEight bits — 2.1, 2.2, 2.3, 2.4, 2.6, 2.7, 2.8 and 2.9 mm\u003c\/li\u003e\n  \u003cli\u003e4 mm hex shank — resists slipping in the chuck\u003c\/li\u003e\n  \u003cli\u003eSharp point cuts gradually, so the bit wanders less and the hole stays round\u003c\/li\u003e\n  \u003cli\u003eLeaves a clean edge where the bit exits\u003c\/li\u003e\n  \u003cli\u003eBites with light pressure\u003c\/li\u003e\n  \u003cli\u003eMagnetic fit: seats by pushing it into the Quick Power Pin Vise\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick Drill Bit D 2.1 mm x 1\u003c\/li\u003e\n  \u003cli\u003e2.2 mm x 1\u003c\/li\u003e\n  \u003cli\u003e2.3 mm x 1\u003c\/li\u003e\n  \u003cli\u003e2.4 mm x 1\u003c\/li\u003e\n  \u003cli\u003e2.6 mm x 1\u003c\/li\u003e\n  \u003cli\u003e2.7 mm x 1\u003c\/li\u003e\n  \u003cli\u003e2.8 mm x 1\u003c\/li\u003e\n  \u003cli\u003e2.9 mm x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480192651444,"sku":"GH-DBQ-8D","price":30.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-dbq-8d_0.jpg?v=1756196163"},{"product_id":"godhand-godhand-micro-power-pin-vise","title":"GodHand - Micro Power Pin Vise","description":"\u003cp\u003eThe Micro Power Pin Vise is the smallest and lightest power pin vise in history! This ultra-compact power pin vise specializes in the smallest, finest work. The iron collet firmly grips the thin, fine drill; because it's small and short, it's easy to handle and ideal for detailed work. It's light and easy to control, too, reducing the risk of breaking the thin drill bit (sold separately, not included). [Compatible Size]: Can be used with drill bits from 0.1mm-1mm diameter Drill bit is not included.\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480197370036,"sku":"GH-PBM","price":43.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/7457559904436_hires_c680c1e3-3449-4118-9b8f-1759bf0d3700.jpg?v=1791836439"},{"product_id":"godhand-godhand-quick-power-pin-vise","title":"GodHand - Quick Power Pin Vise","description":"\u003cp\u003eGodHand Quick Power Pin Vise (GH-PBQ) — a pin vise with a hexagonal socket and a magnetic seat, for changing drill bits without fiddling.\u003c\/p\u003e\u003cp\u003eThe connection is hexagonal, so the bit meshes properly with the vise instead of rounding off and spinning. A 4 mm hex-shank bit is fitted simply by pushing it into the vise — the magnet seats it, so there is no adjustment to make. That is what makes it quick: it suits anyone who wants to get through drilling work faster, and it pairs with the Quick Drill Bit range. The rotary washer is slim and free of lumps, so it sits in the palm without getting in the way or becoming uncomfortable over a long session. Overall length approx. 80 mm.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHexagonal socket — the bit meshes properly and does not spin\u003c\/li\u003e\n  \u003cli\u003eMagnetic seat: push a 4 mm hex-shank bit in and it is seated\u003c\/li\u003e\n  \u003cli\u003eNo adjustment needed when changing bits\u003c\/li\u003e\n  \u003cli\u003ePairs with the Quick Drill Bit range\u003c\/li\u003e\n  \u003cli\u003eSlim, smooth rotary washer fits the palm — comfortable and stable\u003c\/li\u003e\n  \u003cli\u003eOverall length approx. 80 mm\u003c\/li\u003e\n  \u003cli\u003eFits 4 mm hex shanks\u003c\/li\u003e\n  \u003cli\u003eBody and rotary washer: brass; rubber grip: TPE; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick Power Pin Vise (GH-PBQ) x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480197402804,"sku":"GH-PBQ","price":43.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/7457559937204_hires_2a83bede-b4be-432c-937c-90da4df61c91.jpg?v=1791836440"},{"product_id":"godhand-godhand-pbs-dc-drill-bit-make-holes-set-limited-special-pricing","title":"GodHand - PBS-DC \u0026 drill bit \"make holes\" set [LIMITED\/SPECIAL PRICING]","description":"\u003cp\u003eSet of pin vise and bits set for making various types of holes.\u003cbr\u003eGH-PBS-DCPin Vise for 2.5~3.2mm round shaft drill bits.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Iron, Blass, TPE\u003cbr\u003eGH-DB-5B Drill blade set for pin vise. Dia of blades: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm Amount: 5 pcs Material: Special tool steel\u003cbr\u003eGH-CSB-1-3 Spin Mold set for making round flat bottom holes. With center pin, you can drill a hole without apilot hole Dia. of blade: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm Amount: 5 pcs Material: Special tool steel1460.00\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480197435572,"sku":"GH-PBS-CSBDB-SET","price":127.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/7457559969972_hires_d504b4ee-bfb6-402e-9989-ca1a1831985f.jpg?v=1791836443"},{"product_id":"godhand-godhand-short-power-pinvise","title":"GodHand - Short Power PinVise","description":"\u003cp\u003eSlim rotary washer fits in the palm and easy-to-hold! Comfortable and stable hold in your hand for smooth work! In addition to the slim, easy-to-hold rotary washer, a steel-made ‘deep collet’ (one-end collet) is adopted, enabling a deep drill insertion. With deeper insertion, the distance between your fingertip and the cutting edge is closer, realizing in easier handling. Same as Power Pin Vise series, the steel collet chuck is wear-resistant and holds bit or drill blade firmly without idling. GodHand’s original rubber grip! Rubber grip reduces finger strain. Ideal for fine-size drilling and deburring thanks to its easy-to-handle specification. Perfect matches with GodHand’s Bit series! Slim, no uneven rotary washer The total length is approx. 80 mm, only 2\/3 of GodHand’s Power Pin Vice Steel collet and chuck strongly reduce idling. Rubber grip for easy holding, non-slip hand, and easy force application. Good compatibility with GodHand’s Bit series (shaft diameter 2.5 mm, 3.0 mm) and increases workability using both. GodHand’s original deep collet adopted for the built-in collet. Deep installation of the bit (blade) makes a closer distance from your fingertip to the blade tip, realizing easier handling.\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480197501108,"sku":"GH-PBS-DC","price":58.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/7457560035508_hires_e6be2a27-62b8-49ea-bc12-5a6bf8c974e2.jpg?v=1791836450"},{"product_id":"godhand-godhand-riegel-needle","title":"GodHand - Riegel Needle","description":"\u003cp\u003eGodHand Riegel Needle Set (GH-RN-SET) — two scribing needles in one set, one for straight lines and one for curves.\u003c\/p\u003e\u003cp\u003eThe two have different jobs. The straight needle has a tip shaped to track forward, so once you understand how it behaves you can pull a genuinely straight, clean line freehand; it is sturdy enough to be scraped along the surface, which also makes it useful as a heavier scribing tool. The curved needle has no directional bias, so you can change direction mid-line — that makes it the one for curves and circular scribing, though in practice lines are usually laid out against guide tape. It is forgiving and comparatively easy to use for a first needle. Knowing which to pick is most of the work. Both share a 3 mm shank.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo needles: one for straight lines, one for curves\u003c\/li\u003e\n  \u003cli\u003eStraight needle tracks forward for freehand straight lines\u003c\/li\u003e\n  \u003cli\u003eStraight needle is sturdy enough to be used for scraping cuts\u003c\/li\u003e\n  \u003cli\u003eCurved needle has no directional bias — good for curves and circular scribing\u003c\/li\u003e\n  \u003cli\u003e3.0 mm shank, used in a pin vise\u003c\/li\u003e\n  \u003cli\u003eNeedle material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRiegel needle, straight x 1\u003c\/li\u003e\n  \u003cli\u003eRiegel needle, curved x 1\u003c\/li\u003e\n  \u003cli\u003eCase x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480197599412,"sku":"GH-RN-SET","price":27.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/7457560133812_hires_8fc74fd6-820f-4363-8b6f-9e59f36d71b2.jpg?v=1791836450"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-1-1mm","title":"GodHand - Spin Blade Chisel Bit 1.1mm","description":"\u003cp\u003e\u003cstrong\u003eGodHand Spin Blade Chisel Bit 1.1 mm (GH-SB-11)\u003c\/strong\u003e — a single 1.1 mm bit that works as both a rotating hole-bottom cutter and a thin chisel blade. It is one bit from the GH-SB-11-14 set (1.1–1.4 mm, 4 pieces).\u003c\/p\u003e\u003cp\u003eA Spin Blade is a cutter you turn rather than push. Drill a pilot hole with a drill bit of the same diameter, fit the matching Spin Blade in the pin vise, and rotate it to level the bottom of the hole — which is how you get a flat-bottomed round moulding instead of the rounded bottom a drill leaves. The thin edge also works as a chisel. Every bit in the range shares a 3 mm shank, so the same collet fits them all and you can swap between sizes without changing anything on the vise.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBlade diameter 1.1 mm\u003c\/li\u003e\n  \u003cli\u003eRotated in a pin vise to flatten the bottom of a drilled hole\u003c\/li\u003e\n  \u003cli\u003eAlso works as a thin chisel\u003c\/li\u003e\n  \u003cli\u003e3 mm shank — matches the rest of the Spin Blade range\u003c\/li\u003e\n  \u003cli\u003ePart of the GH-SB-11-14 set (1.1–1.4 mm)\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eBlade material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin Blade chisel bit 1.1 mm x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480197697716,"sku":"GH-SB-11","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-11_0.jpg?v=1756207305"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-1-2mm","title":"GodHand - Spin Blade Chisel Bit 1.2mm","description":"\u003cp\u003eThe GodHand Spin Blade Chisel Bit is a must-have tool for any hobbyist or model builder. This 1.2mm chisel bit is designed to fit perfectly with the GodHand Spin Blade Chisel Handle, allowing for precise and clean cuts on various materials. With its high-quality construction and sharp blade, this chisel bit ensures smooth and accurate carving every time. - 1.2mm chisel bit for precise and clean cuts - Compatible with GodHand Spin Blade Chisel Handle - High-quality construction for durability - Sharp blade for smooth and accurate carving - Ideal for hobbyists and model builders - Easy to use and handle - Perfect addition to any tool kit\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480197796020,"sku":"GH-SB-12","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-12_0.jpg?v=1756207278"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-1-3mm","title":"GodHand - Spin Blade Chisel Bit 1.3mm","description":"\u003cp\u003eThe GodHand Spin Blade Chisel Bit is a high-quality tool designed for precision cutting and shaping in various crafting projects. With a diameter of 1.3mm, this chisel bit is perfect for creating intricate details and fine lines. Its durable construction ensures long-lasting performance, while the ergonomic design provides comfortable handling. The GodHand Spin Blade Chisel Bit is compatible with most rotary tools, making it a versatile addition to any hobbyist's toolkit. - High-quality chisel bit for precision cutting and shaping - 1.3mm diameter ideal for intricate details and fine lines - Durable construction for long-lasting performance - Ergonomic design for comfortable handling - Compatible with most rotary tools - Perfect for various crafting projects - A versatile addition to any hobbyist's toolkit\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480197828788,"sku":"GH-SB-13","price":15.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-13_0.jpg?v=1756207358"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-1-4mm","title":"GodHand - Spin Blade Chisel Bit 1.4mm","description":"\u003cp\u003eThe GodHand Spin Blade Chisel Bit is a must-have tool for any hobbyist or model builder. This 1.4mm chisel bit is designed to fit perfectly with the GodHand Spin Blade handle, allowing for precise and clean cuts on various materials. With its high-quality construction and sharp blade, this chisel bit ensures smooth and effortless carving. - Compatible with GodHand Spin Blade handle - 1.4mm size for precise cuts - High-quality construction for durability - Sharp blade for effortless carving - Suitable for plastic, resin, and wood materials - Provides clean and smooth cuts - Essential tool for hobbyists and model builders\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480197894324,"sku":"GH-SB-14","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-14_0.jpg?v=1756207245"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-1-6mm","title":"GodHand - Spin Blade Chisel Bit 1.6mm","description":"\u003cp\u003eThe GodHand Spin Blade Chisel Bit is a must-have tool for any hobbyist or model builder. This 1.6mm chisel bit is designed to fit perfectly with the GodHand Spin Blade Chisel Handle, allowing for precise and clean cuts on various materials. With its high-quality construction and sharp blade, this chisel bit ensures smooth and accurate carving every time. - 1.6mm chisel bit for precise and clean cuts - Compatible with GodHand Spin Blade Chisel Handle - High-quality construction for durability - Sharp blade for smooth and accurate carving - Ideal for hobbyists and model builders - Easy to use and handle - Perfect addition to any tool kit\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480197927092,"sku":"GH-SB-16","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-16_0.jpg?v=1756207250"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-1-7mm","title":"GodHand - Spin Blade Chisel Bit 1.7mm","description":"\u003cp\u003eThe GodHand Spin Blade Chisel Bit is a must-have tool for any hobbyist or model builder. This high-quality chisel bit is designed to provide precise and clean cuts on various materials, including plastic, resin, and wood. With a diameter of 1.7mm, it is perfect for creating fine details and intricate designs. The Spin Blade Chisel Bit is compatible with the GodHand Spin Blade Chisel Handle, allowing for easy and comfortable use. - High-quality chisel bit for precise and clean cuts - Suitable for plastic, resin, and wood materials - 1.7mm diameter for fine details and intricate designs - Compatible with the GodHand Spin Blade Chisel Handle - Ideal for hobbyists, model builders, and craft enthusiasts - Helps achieve professional-looking results - Easy and comfortable to use.\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198090932,"sku":"GH-SB-17","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-17_0.jpg?v=1756207297"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-1-8mm","title":"GodHand - Spin Blade Chisel Bit 1.8mm","description":"\u003cp\u003e\u003cstrong\u003eGodHand Spin Blade Chisel Bit 1.8 mm (GH-SB-18)\u003c\/strong\u003e — a single 1.8 mm bit that works as both a rotating hole-bottom cutter and a thin chisel blade. It is one bit from the GH-SB-16-19 set (1.6–1.9 mm, 4 pieces).\u003c\/p\u003e\u003cp\u003eA Spin Blade is a cutter you turn rather than push. Drill a pilot hole with a drill bit of the same diameter, fit the matching Spin Blade in the pin vise, and rotate it to level the bottom of the hole — which is how you get a flat-bottomed round moulding instead of the rounded bottom a drill leaves. The thin edge also works as a chisel. Every bit in the range shares a 3 mm shank, so the same collet fits them all and you can swap between sizes without changing anything on the vise.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBlade diameter 1.8 mm\u003c\/li\u003e\n  \u003cli\u003eRotated in a pin vise to flatten the bottom of a drilled hole\u003c\/li\u003e\n  \u003cli\u003eAlso works as a thin chisel\u003c\/li\u003e\n  \u003cli\u003e3 mm shank — matches the rest of the Spin Blade range\u003c\/li\u003e\n  \u003cli\u003ePart of the GH-SB-16-19 set (1.6–1.9 mm)\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eBlade material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin Blade chisel bit 1.8 mm x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198123700,"sku":"GH-SB-18","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-18_0.jpg?v=1756207272"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-1-9mm","title":"GodHand - Spin Blade Chisel Bit 1.9mm","description":"\u003cp\u003eThe GodHand Spin Blade Chisel Bit is a must-have tool for any hobbyist or model builder. This 1.9mm chisel bit is designed to effortlessly remove excess plastic or resin from your models, leaving behind clean and precise cuts. With its high-quality construction and sharp blade, it ensures smooth and accurate results every time. The ergonomic handle provides a comfortable grip, allowing for hours of comfortable use. - Effortlessly removes excess plastic or resin - Leaves behind clean and precise cuts - High-quality construction for durability - Sharp blade ensures smooth and accurate results - Ergonomic handle for comfortable grip - Suitable for miniatures, scale models, and Gundam kits - A must-have tool for hobbyists and model builders.\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198156468,"sku":"GH-SB-19","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/4562349873142_033007763509e6427a30a3603d9ea56f__29649.1571192484.jpg?v=1706748340"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-2-1mm","title":"GodHand - Spin Blade Chisel Bit 2.1mm","description":"\u003cp\u003e\u003cstrong\u003eGodHand Spin Blade Chisel Bit 2.1 mm (GH-SB-21)\u003c\/strong\u003e — a single 2.1 mm bit that works as both a rotating hole-bottom cutter and a thin chisel blade. It is one bit from the GH-SB-21-24 set (2.1–2.4 mm, 4 pieces).\u003c\/p\u003e\u003cp\u003eA Spin Blade is a cutter you turn rather than push. Drill a pilot hole with a drill bit of the same diameter, fit the matching Spin Blade in the pin vise, and rotate it to level the bottom of the hole — which is how you get a flat-bottomed round moulding instead of the rounded bottom a drill leaves. The thin edge also works as a chisel. Every bit in the range shares a 3 mm shank, so the same collet fits them all and you can swap between sizes without changing anything on the vise.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBlade diameter 2.1 mm\u003c\/li\u003e\n  \u003cli\u003eRotated in a pin vise to flatten the bottom of a drilled hole\u003c\/li\u003e\n  \u003cli\u003eAlso works as a thin chisel\u003c\/li\u003e\n  \u003cli\u003e3 mm shank — matches the rest of the Spin Blade range\u003c\/li\u003e\n  \u003cli\u003ePart of the GH-SB-21-24 set (2.1–2.4 mm)\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eBlade material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin Blade chisel bit 2.1 mm x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198189236,"sku":"GH-SB-21","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-21_0.jpg?v=1756207252"},{"product_id":"godhand-godhand-spin-blade-2-1mm-2-4mm","title":"GodHand - Spin Blade 2.1mm-2.4mm","description":"\u003cp\u003eThe highly sought-after Spin Blade tool set by GodHand — now available in a convenient pack of four! This versatile tool is a must-have for any hobbyist, allowing you to effortlessly create precise holes in your kits with increments of 0.1mm. Not only is it perfect for drilling, but its exceptional sharpness also enables it to double as a chisel. 1mm - 2.2mm - 2.3mm - 2.4mm - [Shaft Diameter]: - 3mm\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198222004,"sku":"GH-SB-21-24","price":38.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/4562349874163_705732741c82fa060159c35feaaac8c9__03453.1620293018.jpg?v=1702086342"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-2-2mm","title":"GodHand - Spin Blade Chisel Bit 2.2mm","description":"\u003cp\u003eThe GodHand Spin Blade Chisel Bit 2.2mm — a must-have tool for all hobbyists and craftsmen. This high-quality chisel bit is designed to provide precise and clean cuts on various materials. With its durable construction and sharp blade, it ensures long-lasting performance. The ergonomic handle offers a comfortable grip, allowing for effortless control and accuracy. - High-quality chisel bit for precise and clean cuts - Durable construction for long-lasting performance - Sharp blade for exceptional cutting efficiency - Ergonomic handle for comfortable grip and control - Suitable for working on plastic, wood, and metal - Enhances accuracy and craftsmanship - A must-have tool for hobbyists and craftsmen\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198254772,"sku":"GH-SB-22","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-22_0.jpg?v=1756207248"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-2-3mm","title":"GodHand - Spin Blade Chisel Bit 2.3mm","description":"\u003cp\u003e\u003cstrong\u003eGodHand Spin Blade Chisel Bit 2.3 mm (GH-SB-23)\u003c\/strong\u003e — a single 2.3 mm bit that works as both a spinning hole-bottom cutter and a thin chisel blade.\u003c\/p\u003e\u003cp\u003eFit it into a pin vise, drill a pilot hole of the same diameter, then use the Spin Blade to flatten the bottom of the hole. The 3 mm shank matches the rest of the Spin Blade range, so the same collet works across the whole set. All Spin Blade bits share the same 3.0 mm body diameter.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003eBlade diameter 2.3 mm\u003c\/li\u003e\n \u003cli\u003eBody diameter 3.0 mm — same collet as the rest of the range\u003c\/li\u003e\n \u003cli\u003eServes as both a spin blade and a thin chisel\u003c\/li\u003e\n \u003cli\u003eSize number engraved on the tool for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003eSpin Blade chisel bit 2.3 mm x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198320308,"sku":"GH-SB-23","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-23_0.jpg?v=1756207364"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-2-4mm","title":"GodHand - Spin Blade Chisel Bit 2.4mm","description":"\u003cp\u003e\u003cstrong\u003eGodHand Spin Blade Chisel Bit 2.4 mm (GH-SB-24)\u003c\/strong\u003e — a single 2.4 mm bit that works as both a rotating hole-bottom cutter and a thin chisel blade. It is one bit from the GH-SB-21-24 set (2.1–2.4 mm, 4 pieces).\u003c\/p\u003e\u003cp\u003eA Spin Blade is a cutter you turn rather than push. Drill a pilot hole with a drill bit of the same diameter, fit the matching Spin Blade in the pin vise, and rotate it to level the bottom of the hole — which is how you get a flat-bottomed round moulding instead of the rounded bottom a drill leaves. The thin edge also works as a chisel. Every bit in the range shares a 3 mm shank, so the same collet fits them all and you can swap between sizes without changing anything on the vise.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBlade diameter 2.4 mm\u003c\/li\u003e\n  \u003cli\u003eRotated in a pin vise to flatten the bottom of a drilled hole\u003c\/li\u003e\n  \u003cli\u003eAlso works as a thin chisel\u003c\/li\u003e\n  \u003cli\u003e3 mm shank — matches the rest of the Spin Blade range\u003c\/li\u003e\n  \u003cli\u003ePart of the GH-SB-21-24 set (2.1–2.4 mm)\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eBlade material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin Blade chisel bit 2.4 mm x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198353076,"sku":"GH-SB-24","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-24_0.jpg?v=1756207256"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-2-6mm","title":"GodHand - Spin Blade Chisel Bit 2.6mm","description":"\u003cp\u003e\u003cstrong\u003eGodHand Spin Blade Chisel Bit 2.6 mm (GH-SB-26)\u003c\/strong\u003e — a single 2.6 mm bit that works as both a rotating hole-bottom cutter and a thin chisel blade. It is one bit from the GH-SB-26-29 set (2.6–2.9 mm, 4 pieces).\u003c\/p\u003e\u003cp\u003eA Spin Blade is a cutter you turn rather than push. Drill a pilot hole with a drill bit of the same diameter, fit the matching Spin Blade in the pin vise, and rotate it to level the bottom of the hole — which is how you get a flat-bottomed round moulding instead of the rounded bottom a drill leaves. The thin edge also works as a chisel. Every bit in the range shares a 3 mm shank, so the same collet fits them all and you can swap between sizes without changing anything on the vise.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBlade diameter 2.6 mm\u003c\/li\u003e\n  \u003cli\u003eRotated in a pin vise to flatten the bottom of a drilled hole\u003c\/li\u003e\n  \u003cli\u003eAlso works as a thin chisel\u003c\/li\u003e\n  \u003cli\u003e3 mm shank — matches the rest of the Spin Blade range\u003c\/li\u003e\n  \u003cli\u003ePart of the GH-SB-26-29 set (2.6–2.9 mm)\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eBlade material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin Blade chisel bit 2.6 mm x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198385844,"sku":"GH-SB-26","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-26_0.jpg?v=1756207298"},{"product_id":"godhand-godhand-spin-blade-2-6mm-2-9mm","title":"GodHand - Spin Blade 2.6mm-2.9mm","description":"\u003cp\u003eThe highly sought-after Spin Blade tool set by GodHand — now available in a convenient pack of four! These precision tools are designed to effortlessly create holes in your projects, with increments of 0.1mm for ultimate accuracy. Not only are they perfect for drilling, but their exceptional sharpness also allows them to double as chisels. 6mm - 2.7mm - 2.8mm - 2.9mm - [Shaft Diameter]: - 3mm\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198418612,"sku":"GH-SB-26-29","price":38.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/7457560887476_hires_602c5bb5-3334-4424-b77b-cbf4b331030f.jpg?v=1791836451"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-2-7mm","title":"GodHand - Spin Blade Chisel Bit 2.7mm","description":"\u003cp\u003e\u003cstrong\u003eGodHand Spin Blade Chisel Bit 2.7 mm (GH-SB-27)\u003c\/strong\u003e — a single 2.7 mm bit that works as both a rotating hole-bottom cutter and a thin chisel blade. It is one bit from the GH-SB-26-29 set (2.6–2.9 mm, 4 pieces).\u003c\/p\u003e\u003cp\u003eA Spin Blade is a cutter you turn rather than push. Drill a pilot hole with a drill bit of the same diameter, fit the matching Spin Blade in the pin vise, and rotate it to level the bottom of the hole — which is how you get a flat-bottomed round moulding instead of the rounded bottom a drill leaves. The thin edge also works as a chisel. Every bit in the range shares a 3 mm shank, so the same collet fits them all and you can swap between sizes without changing anything on the vise.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBlade diameter 2.7 mm\u003c\/li\u003e\n  \u003cli\u003eRotated in a pin vise to flatten the bottom of a drilled hole\u003c\/li\u003e\n  \u003cli\u003eAlso works as a thin chisel\u003c\/li\u003e\n  \u003cli\u003e3 mm shank — matches the rest of the Spin Blade range\u003c\/li\u003e\n  \u003cli\u003ePart of the GH-SB-26-29 set (2.6–2.9 mm)\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eBlade material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin Blade chisel bit 2.7 mm x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198484148,"sku":"GH-SB-27","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-27_0.jpg?v=1756207365"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-2-8mm","title":"GodHand - Spin Blade Chisel Bit 2.8mm","description":"\u003cp\u003e\u003cstrong\u003eGodHand Spin Blade Chisel Bit 2.8 mm (GH-SB-28)\u003c\/strong\u003e — a single 2.8 mm bit that works as both a rotating hole-bottom cutter and a thin chisel blade. It is one bit from the GH-SB-26-29 set (2.6–2.9 mm, 4 pieces).\u003c\/p\u003e\u003cp\u003eA Spin Blade is a cutter you turn rather than push. Drill a pilot hole with a drill bit of the same diameter, fit the matching Spin Blade in the pin vise, and rotate it to level the bottom of the hole — which is how you get a flat-bottomed round moulding instead of the rounded bottom a drill leaves. The thin edge also works as a chisel. Every bit in the range shares a 3 mm shank, so the same collet fits them all and you can swap between sizes without changing anything on the vise.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBlade diameter 2.8 mm\u003c\/li\u003e\n  \u003cli\u003eRotated in a pin vise to flatten the bottom of a drilled hole\u003c\/li\u003e\n  \u003cli\u003eAlso works as a thin chisel\u003c\/li\u003e\n  \u003cli\u003e3 mm shank — matches the rest of the Spin Blade range\u003c\/li\u003e\n  \u003cli\u003ePart of the GH-SB-26-29 set (2.6–2.9 mm)\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eBlade material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin Blade chisel bit 2.8 mm x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198516916,"sku":"GH-SB-28","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-28_0.jpg?v=1756207301"},{"product_id":"godhand-godhand-spin-blade-chisel-bit-2-9mm","title":"GodHand - Spin Blade Chisel Bit 2.9mm","description":"\u003cp\u003eThe GodHand Spin Blade Chisel Bit 2.9mm — a must-have tool for all hobbyists and craftsmen. This high-quality chisel bit is designed to provide precise and clean cuts on various materials. With its innovative spin blade technology, it ensures smooth and effortless carving. The ergonomic handle offers a comfortable grip, reducing hand fatigue during long hours of work. This versatile chisel bit is perfect for model making, woodworking, and other intricate projects. 9mm and experience superior craftsmanship like never before. - High-quality chisel bit for precise and clean cuts - Innovative spin blade technology for smooth carving - Ergonomic handle for comfortable grip - Versatile tool suitable for model making, woodworking, and more - Enhances overall craftsmanship - Durable and long-lasting construction - Perfect addition to any hobbyist or craftsman's toolkit\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198549684,"sku":"GH-SB-29","price":13.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-sb-29_0.jpg?v=1756207280"},{"product_id":"godhand-godhand-spin-blade-3-2mm-4-5mm","title":"GodHand - Spin Blade 3.2mm-4.5mm","description":"\u003cp\u003eWider than 3mm in diameter Spin Blades release!\u003c\/p\u003e\n\u003cp\u003eNew size of Spin Blade which you can use for drilling holes and as chisels release!\u003c\/p\u003e\n\u003cp\u003eNew diameters' set of 3.2mm, 3.5mm, 4.0mm, and 4.5mm. The attachment parts are 3mm in diameter and same as existing Spin Blade, so you can use same collet and do not need to change it when you use other Spin Blades as before!\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42480198582452,"sku":"GH-SB-32-45","price":41.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/4562349873869_f009a20ab1b4bf447db57f073f494d71__27248.1593158507.jpg?v=1706748332"},{"product_id":"godhand-godhand-power-pin-vise","title":"GodHand - Power Pin Vise","description":"\u003cp\u003eGodHand Power Pin Vise (GH-PB-98ST) — an iron-capped pin vise that holds a drill bit firmly and takes Ø0.1 to Ø3.2 mm.\u003c\/p\u003e\u003cp\u003eThe cap and the collets are iron, and that is the point: a hard metal chuck grips without the slipping and spinning that a soft one develops with use, whether the bit is thin or thick. Two collets are supplied, which between them cover Ø0.1 mm to Ø3.2 mm. The rubber grip is GodHand’s own in blue, shaped so it is easy on the fingers and comfortable over a long session. It suits fine drilling and deburring work.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIron cap and collets — grip firmly and resist wearing to a slip\u003c\/li\u003e\n  \u003cli\u003eTwo collets cover Ø0.1 mm to Ø3.2 mm\u003c\/li\u003e\n  \u003cli\u003eGodHand original blue rubber grip — comfortable over long sessions\u003c\/li\u003e\n  \u003cli\u003eSuited to fine drilling and deburring\u003c\/li\u003e\n  \u003cli\u003eOverall length approx. 100 mm\u003c\/li\u003e\n  \u003cli\u003eMaterials: iron (tip cap, collets), brass (body)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePower Pin Vise x 1\u003c\/li\u003e\n  \u003cli\u003eCollet x 2\u003c\/li\u003e\n  \u003cli\u003eTip cap x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42519320789172,"sku":"GH-PB-98ST","price":61.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/7473969397940_hires_32be971f-a727-4049-adc4-e4b441144af6.jpg?v=1791837941"},{"product_id":"godhand-spin-mold-1-2mm-1-7mm-4-pcs-set","title":"Spin Mold 1.2mm-1.7mm (4 pcs set)","description":"\u003cp\u003eNew variety of Spin Mold set for making round flatbottom holes. With center pin, you can drill a hole without a pilot hole! Good for detailing. *not available as\u003c\/p\u003e\n\u003cp\u003echisels.\u003c\/p\u003e\n\u003cp\u003eDia of blade: 1.2mm, 1.3mm, 1.6mm, 1.7mm,\u003c\/p\u003e\n\u003cp\u003e4pcs set\u003c\/p\u003e\n\u003cp\u003eDia of body.: 3.0mm\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42644888977588,"sku":"GH-CSB-12-17","price":64.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/4562349870257_17d83e8ea7a0233da5b8a316bd7a94ad__12908.1694415468.jpg?v=1706916364"},{"product_id":"godhand-spin-mold-2-1mm-2-7mm-4-pcs-set","title":"Spin Mold 2.1mm-2.7mm (4 pcs set)","description":"\u003cp\u003eNew variety of Spin Mold set for making round flatbottom holes.\u003c\/p\u003e\n\u003cp\u003eWith center pin, you can drill a hole without a pilot hole! Good for detailing.\u003c\/p\u003e\n\u003cp\u003e*not available as chisels.\u003c\/p\u003e\n\u003cp\u003eDia of blade: 2.1mm, 2.2mm, 2.6mm, 2.7mm,\u003c\/p\u003e\n\u003cp\u003e4pcs set\u003c\/p\u003e\n\u003cp\u003eDia of body.: 3.0mm\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42644889010356,"sku":"GH-CSB-21-27","price":64.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/174C0692-BBC1-11EE-A97B-711E421BFA1B-L.png?v=1733831883"},{"product_id":"godhand-spin-mold-3-1mm-3-3mm-3-pcs-set","title":"Spin Mold 3.1mm-3.3mm (3 pcs set)","description":"\u003cp\u003eNew variety of Spin Mold set for making round flatbottom holes.\u003c\/p\u003e\n\u003cp\u003eWith center pin, you can drill a hole without a pilot hole! Good for detailing.\u003c\/p\u003e\n\u003cp\u003e*not available as chisels.\u003c\/p\u003e\n\u003cp\u003eDia of blade: 3.1mm, 3.2mm, 3.3mm, 3pcs set\u003c\/p\u003e\n\u003cp\u003eDia of body.: 3.0mm\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42644889043124,"sku":"GH-CSB-31-33","price":64.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-csb-31-33_0.jpg?v=1756183077"},{"product_id":"godhand-spin-mold-4-0mm-4-2mm-3-pcs-set","title":"Spin Mold 4.0mm-4.2mm (3 pcs set)","description":"\u003cp\u003eGodHand Spin Mold 4.0–4.2 mm Set of 3 (GH-CSB-40-42) — flat drills with a centre guide that cut a round hole with a flat bottom, no pilot hole required.\u003c\/p\u003e\u003cp\u003eA normal drill leaves a cone at the bottom. A Spin Mold has a centre guide instead, so you can press the point where you want the hole, turn it clockwise with light pressure, and cut down to the depth you want with a flat floor and a clean round wall. The centre guide is also what keeps the hole in the position you picked. The three bits are 4.0, 4.1 and 4.2 mm and share a 3 mm shank, so no collet change is needed. Note that Spin Molds cannot be used as chisels the way Spin Blades can.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThree bits — 4.0, 4.1 and 4.2 mm, in 0.1 mm steps\u003c\/li\u003e\n  \u003cli\u003eCuts a flat-bottomed round hole — no pilot hole needed\u003c\/li\u003e\n  \u003cli\u003eCentre guide holds the position and leaves a small centre mark\u003c\/li\u003e\n  \u003cli\u003e3 mm shank across the set — no collet change\u003c\/li\u003e\n  \u003cli\u003eNot usable as a chisel (unlike Spin Blades)\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eUse in a pin vise; turn clockwise with light pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin Mold 4.0 mm x 1\u003c\/li\u003e\n  \u003cli\u003e4.1 mm x 1\u003c\/li\u003e\n  \u003cli\u003e4.2 mm x 1\u003c\/li\u003e\n  \u003cli\u003eCase x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42644889305268,"sku":"GH-CSB-40-42","price":64.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/42A8C972-BBC3-11EE-B3B6-6B1E421BFA1B-L.png?v=1733831892"},{"product_id":"godhand-spin-mold-3-5mm-3-7mm-3-pcs-set","title":"Spin Mold 3.5mm-3.7mm (3 pcs set)","description":"\u003cp\u003eNew variety of Spin Mold set for making round flatbottom holes.\u003c\/p\u003e\n\u003cp\u003eWith center pin, you can drill a hole without a pilot hole! Good for detailing.\u003c\/p\u003e\n\u003cp\u003e*not available as chisels.\u003c\/p\u003e\n\u003cp\u003eDia of blade: 3.5mm, 3.6mm, 3.7mm, 3pcs set\u003c\/p\u003e\n\u003cp\u003eDia of body.: 3.0mm\u003c\/p\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":42644889272500,"sku":"GH-CSB-35-37","price":64.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-csb-35-37_0.jpg?v=1756183094"},{"product_id":"godhand-godhand-spin-mold-for-carve-a-hole-4562349870578","title":"GodHand - Spin Mold (For Carve a hole)","description":"\u003cp\u003eGodHand Spin Mold bit set for creating perfect flat-bottomed holes in plastic models.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCenter pin prevents axle movement\u003c\/li\u003e\n\u003cli\u003eNo pilot hole required\u003c\/li\u003e\n\u003cli\u003eCreate flat-bottomed holes instead of rounded\u003c\/li\u003e\n\u003cli\u003eTwo-tier mold capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBit Sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm\u003c\/li\u003e\n\u003cli\u003eAxle Thickness: 3mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Included storage case\u003c\/li\u003e\n\u003cli\u003eNot intended for sculpting use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x 1.0mm spin mold\u003c\/li\u003e\n\u003cli\u003e1x 1.5mm spin mold\u003c\/li\u003e\n\u003cli\u003e1x 2.0mm spin mold\u003c\/li\u003e\n\u003cli\u003e1x 2.5mm spin mold\u003c\/li\u003e\n\u003cli\u003e1x 3.0mm spin mold\u003c\/li\u003e\n\u003cli\u003e1x Plastic storage case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":43958116810932,"sku":"GH-CSB-1-3","price":77.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/godgh-csb-1-3_0.jpg?v=1756198464"},{"product_id":"godhand-bit-blade-v-shapededge-4-pcs-set","title":"GodHand - Bit Blade V-shapedEdge 4 pcs set","description":"\u003cp\u003eGodHand Bit Blade V-shaped Edge 4-Piece Set (GH-BBS-05-90) — four push-carving chisels in 5°, 20°, 45° and 90° included angles, for cutting grooves of a consistent depth.\u003c\/p\u003e\u003cp\u003eThe V-shape and a fixed included angle are the point: once the chisel is set, pushing it forward cuts a groove that stays the same depth and width as it travels. Because the included angle changes how wide the groove comes out, the four sizes let you pick the width you want instead of hunting for it. These are for plastic — GodHand lists them as precision triangle chisels used in a pin vise. All four share a 3 mm shank.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded angles 5°, 20°, 45° and 90°\u003c\/li\u003e\n  \u003cli\u003eFixed angle cuts a groove of consistent depth as you push\u003c\/li\u003e\n  \u003cli\u003eIncluded angle sets the groove width — four widths in the set\u003c\/li\u003e\n  \u003cli\u003ePrecision triangle chisel intended for plastic, used in a pin vise\u003c\/li\u003e\n  \u003cli\u003e3 mm shank across the set\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eBlade material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBit Blade V-shaped chisel 5° x 1\u003c\/li\u003e\n  \u003cli\u003e20° x 1\u003c\/li\u003e\n  \u003cli\u003e45° x 1\u003c\/li\u003e\n  \u003cli\u003e90° x 1\u003c\/li\u003e\n  \u003cli\u003eCase x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":44165926289588,"sku":"GH-BBS-05-90","price":45.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/8039132004532_hires.jpg?v=1788826431"},{"product_id":"godhand-quick-attachable-drill-bit-set-a","title":"GodHand - Quick Attachable Drill Bit Set A","description":"\u003cp\u003eGodHand Quick Attachable Drill Bit Set A with 5 precision drill bits designed for model building and hobby work. Features a hexagonal shaft and magnetic fit for quick attachment and precise targeting.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5 drill bits with sizes: 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm\u003c\/li\u003e\n\u003cli\u003e4mm-diameter hexagonal shaft with magnetic fit\u003c\/li\u003e\n\u003cli\u003eNo complicated adjustments required\u003c\/li\u003e\n\u003cli\u003eShorter overall length for easier targeting and handling\u003c\/li\u003e\n\u003cli\u003eObtuse cutting edge enables shallow drilling without piercing thin plastic\u003c\/li\u003e\n\u003cli\u003eProduces clean and neat hole edges\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Special cutlery steel\u003c\/li\u003e\n\u003cli\u003eShaft diameter: 4mm hexagonal\u003c\/li\u003e\n\u003cli\u003eNumber of bits: 5\u003c\/li\u003e\n\u003cli\u003eCompatible with: plastic, resin, aluminum, and brass\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e5 drill bits (0.5-0.9mm sizes)\u003c\/li\u003e\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":44165927469236,"sku":"GH-DBQ-5A","price":29.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/8039132758196_real.jpg?v=1789538121"},{"product_id":"godhand-quick-attachable-drill-bit-set-c","title":"GodHand - Quick Attachable Drill Bit Set C","description":"\u003cp\u003eGodHand Quick Attachable Drill Bit Set C with 8 precision drill bits for model building and plastic model kits. Features hexagonal shaft and magnetic fit for specialized detail work.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 drill bits with sizes: 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm\u003c\/li\u003e\n\u003cli\u003e4mm-diameter hexagonal shaft\u003c\/li\u003e\n\u003cli\u003eMagnetic fit requiring no complicated adjustments\u003c\/li\u003e\n\u003cli\u003eShorter bits allow closer proximity to target\u003c\/li\u003e\n\u003cli\u003eObtuse cutting edge for shallow drilling without piercing\u003c\/li\u003e\n\u003cli\u003eDrill bits over 1.5mm have extra cutting edge at tip for light power drilling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Special cutlery steel\u003c\/li\u003e\n\u003cli\u003eShaft diameter: 4.0mm hexagon\u003c\/li\u003e\n\u003cli\u003eNumber of bits: 8\u003c\/li\u003e\n\u003cli\u003eBit sizes: 1.1-1.9mm\u003c\/li\u003e\n\u003cli\u003eDesigned for plastic model kits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e8 drill bits (1.1-1.9mm sizes)\u003c\/li\u003e\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":44165927698612,"sku":"GH-DBQ-8C","price":34.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/CB036988-A001-11EC-8280-DE3E9D80D5CC-L.png?v=1774001270"},{"product_id":"godhand-spin-blade-0-5mm-0-9mm","title":"GodHand - Spin Blade 0.5mm-0.9mm","description":"\u003cp\u003eGodHand Spin Blade 0.5–0.9 mm Set of 5 (GH-SB-05-09) — five rotating cutters under 1 mm wide that flatten the bottom of a drilled hole, and double as very thin chisels.\u003c\/p\u003e\u003cp\u003eFit a bit into a pin vise, drill a pilot hole with a drill bit of the same diameter, then spin the matching Spin Blade to level the bottom of the hole. That is the trick for a flat-bottomed round moulding — something a drill bit alone leaves rounded. Because the bits also work as thin chisels, they handle small detail carving on figures and mini mecha. All five share a 3 mm shank, so no collet change is needed between them; they pair with the 5-piece Drill Bit Set A.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFive bits — 0.5, 0.6, 0.7, 0.8 and 0.9 mm\u003c\/li\u003e\n  \u003cli\u003eSpins in a pin vise to flatten the bottom of a drilled hole\u003c\/li\u003e\n  \u003cli\u003eAlso works as a very thin chisel for figure and mini-mecha detail\u003c\/li\u003e\n  \u003cli\u003eCutting edges under 1 mm wide\u003c\/li\u003e\n  \u003cli\u003e3 mm shank across the set — no collet change\u003c\/li\u003e\n  \u003cli\u003ePairs with Drill Bit Set A (GH-DB-5A)\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eBlade material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin Blade 0.5 mm x 1\u003c\/li\u003e\n  \u003cli\u003e0.6 mm x 1\u003c\/li\u003e\n  \u003cli\u003e0.7 mm x 1\u003c\/li\u003e\n  \u003cli\u003e0.8 mm x 1\u003c\/li\u003e\n  \u003cli\u003e0.9 mm x 1\u003c\/li\u003e\n  \u003cli\u003eCase x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":44165927796916,"sku":"GH-SB-05-09","price":75.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/8039132954804_hires.jpg?v=1789419077"},{"product_id":"godhand-spin-blade-1-1mm-1-4mm","title":"GodHand - Spin Blade 1.1mm-1.4mm","description":"\u003cp\u003eGodHand Spin Blade 1.1–1.4 mm Set of 4 (GH-SB-11-14) — rotating cutters that flatten the bottom of a drilled hole, and double as thin chisels.\u003c\/p\u003e\u003cp\u003eA Spin Blade is a cutter you turn rather than push. Drill a pilot hole with a bit of the same diameter, fit the matching Spin Blade in the pin vise, and rotate it to level the bottom of the hole — which is how you get a flat-bottomed round moulding instead of the rounded bottom a drill leaves. The thin edge also makes it usable as a chisel. All four share a 3 mm shank.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFour bits — 1.1, 1.2, 1.3 and 1.4 mm\u003c\/li\u003e\n  \u003cli\u003eRotated in a pin vise to flatten the bottom of a drilled hole\u003c\/li\u003e\n  \u003cli\u003eAlso works as a thin chisel\u003c\/li\u003e\n  \u003cli\u003e3 mm shank across the set — no collet change\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eBlade material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin Blade 1.1 mm x 1\u003c\/li\u003e\n  \u003cli\u003e1.2 mm x 1\u003c\/li\u003e\n  \u003cli\u003e1.3 mm x 1\u003c\/li\u003e\n  \u003cli\u003e1.4 mm x 1\u003c\/li\u003e\n  \u003cli\u003eCase x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":44165927862452,"sku":"GH-SB-11-14","price":38.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/8039133020340_hires.jpg?v=1788826443"},{"product_id":"godhand-spin-blade-1-6mm-1-9mm","title":"GodHand - Spin Blade 1.6mm-1.9mm","description":"\u003cp\u003eGodHand Spin Blade 1.6–1.9 mm Set of 4 (GH-SB-16-19) — rotating cutters that flatten the bottom of a drilled hole, and double as thin chisels.\u003c\/p\u003e\u003cp\u003eA Spin Blade is a cutter you turn rather than push. Drill a pilot hole with a bit of the same diameter, fit the matching Spin Blade in the pin vise, and rotate it to level the bottom of the hole — which is how you get a flat-bottomed round moulding instead of the rounded bottom a drill leaves. The thin edge also makes it usable as a chisel. All four share a 3 mm shank.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFour bits — 1.6, 1.7, 1.8 and 1.9 mm\u003c\/li\u003e\n  \u003cli\u003eRotated in a pin vise to flatten the bottom of a drilled hole\u003c\/li\u003e\n  \u003cli\u003eAlso works as a thin chisel\u003c\/li\u003e\n  \u003cli\u003e3 mm shank across the set — no collet change\u003c\/li\u003e\n  \u003cli\u003eSupplied in a case\u003c\/li\u003e\n  \u003cli\u003eBlade material: special cutlery steel; case: PP; made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin Blade 1.6 mm x 1\u003c\/li\u003e\n  \u003cli\u003e1.7 mm x 1\u003c\/li\u003e\n  \u003cli\u003e1.8 mm x 1\u003c\/li\u003e\n  \u003cli\u003e1.9 mm x 1\u003c\/li\u003e\n  \u003cli\u003eCase x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GodHand","offers":[{"title":"Default Title","offer_id":44165928091828,"sku":"GH-SB-16-19","price":38.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4712\/4404\/files\/8039133151412_hires.jpg?v=1788826453"}],"url":"https:\/\/www.prexhobby.com\/collections\/godhand-pin-vises.oembed?page=2","provider":"P-Rex Hobby","version":"1.0","type":"link"}